The Heatmaster is a direct fired hot water storage heater, which has indirect heat transfer due to it's 'Tank in Tank' construction.

At the heart of the heatmaster is a stainless steel cylinder through which the tube flue pass. This is srounded by a mild steel shell containing the primary water.The outer shell extends down to the combustion chamber and even around the flue tubes. The area of the heat transfer surface is therefore much greater than that of standard direct fire water heaters. A circulating pump fitted to the primary circuit, moves the water around the tank heating it faster and maintaining an even temperature across the primary jacket.

The Heatmaster range:

There are several models available in the Heatmaster range which include.

• Heatmaster HM30GA - smallest of the range with an out-put of 37.5kW and supplied with an atmospheric gas burner

• Heatmaster HM60 N & HM100 N - with out-puts of 63kW and 92kW respectively, these two units are available with either pressure jet gas or oil burners

• Heatmaster HM60 Blocgaz & HM100 Blocgaz - with out-puts of 60.5kW and 86kW respectively, these models are supllied with a pre-mix low NOx gas burner and are very quiet in operation

• Heatmaster Jumbo 150 - the flagship of the range with an out-put of 144kW and supplied with either pressure jet gas or oil burner. This heatmaster is an ideal match for the Jumbo hot water storage tank.

• A propane option is available for most models.

For more information and stock availability please ask Phil

Website Supported by Bowker IT Ltd